Hook up vtec light

madoguka   31.05.2017  

vtec hook up

hook up vtec light

Log In Remember Me? All All Threads Posts Advanced. I've searched quite a few forums and came up with the same thing over and over. I know that it was not necessary, but i decided to do it just for the fun of it. Take out vtec hook up cluster and remove the plastic covering. After removing you can easily remove the following sorry don't know the name for it.

If you can't vtec hook up this far without directions, please don't try this. Look where i'm pointing. That is the open space where i put my vtec light. Turn that over and you'll see a small plastic type covering. Somepeople cut that part out and put in a folder tab. This is where mine is different. But before the sign, we must first vtec hook up off the black plastic.

I used a grit sandpaper and it vtec hook up me about 6 minutes because i was hella careful. When doing this, you don't want to completely sand it off, but just do it so that it becomes transparent. After this, print out the VTEC is 10 point Arial font using Word or any other document, then, cut out a cd case and tape it from the back. Now, we super glue this to the plastic tab. You'll now have something like this. Now, put the cluster back in and route the wires to the ECU.

Open the cover and locate the GREEN wire with YELLOW stripe. This is the VTEC wire. There is also a YELLOW wire with GREEN stripe. This is the Fuel pump wire. When you have found this wire, use a wire tap and connect the wire from the ecu to the LED. Now look up and you'll notice this screw. It is what holds the glove box up. Use this as your ground wire. There are many other places you can use, but i decided to use this one. Hook up vtec light all of the wires and put everything back together and take it out for a test drive.

If you have done it correctly, it should light up when you hit rpm. Garage is empty, add now. Last edited by c0V3Ro; at Thread Tools Show Printable Version. Search this Thread Advanced Search. BB code is On. All times are GMT The time now is Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Top.

Patrick Administrator Thread Starter Dodge Mirada My Garage. VTEC Light Installation I've searched quite a few forums and came up with the same thing over and over. Brasilia - Brazil Posts: Fog Light Installation Civic. You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are Off Refbacks are Off Forum Rules.

hook up vtec light

vtec hook up

Honda and Acura OBD2A and OBD2B Depin and Pin ECU Connectors Plugs

Add a comment

Your e-mail will not be published. Required fields are marked *